ErgoDash
ErgoDash copied to clipboard
omkbd
keyboard
Have you ever considered one of these for the ergodash? Apologies that I’m suggesting rather than attempting it myself, I’m still new to circuits/kiCad. The Preonic’s rotary encoder is pretty...
Hi, I builded Rev1.2 with a few parts switched (Different LEDs because Kailh switches, different SMD LEDs SK6812 because they seemed a good option for the ws2812b). I finally installed...
I want to mount more led on the top edge, but I don't know how to connect the power cord and controller cord?
## Abstract As discussed in https://github.com/omkbd/ErgoDash/issues/47, the URL of qmk_firmware was changed to [it](https://github.com/qmk/qmk_firmware/tree/master/keyboards/omkbd/ergodash). I want to fix the link in some markdowns. ## 概要 https://github.com/omkbd/ErgoDash/issues/47 で議論されている通り、qmk_firmware側のURLが[こちら](https://github.com/qmk/qmk_firmware/tree/master/keyboards/omkbd/ergodash)に変更されているので、ドキュメント内のリンクを修正するPRになります。
Hi, the link for Ergodash Firmware is broken. Please, check it out. https://github.com/qmk/qmk_firmware/tree/master/keyboards/ergodash Thanks!
I can't find the `IRLML6344TRPbF` on my local vendors' pages so I wanna look for possible substitutes before I shop and build. What can I substitute it with?
If there is a future revision of the Ergodash keyboard, would you consider increasing the space size of the holes for the Pro-micro to permit the use of sockets for...
Please update Build Guide / Parts List 1. M2×6mm spacer. Should say "M2×6mm threaded spacer" 2. When using the full-size (i.e. both thumb cluster buttons), you need 16 spacers, not...
I sent the v1.2 gerber files to print in [jlcpcb](http://jlcpcb.com/) and they asked me to change the file to increase the size of the connections to at least 4mm each....
