ha-smartthinq-sensors
ha-smartthinq-sensors copied to clipboard
Survey | List of known supported devices
Hi,
is there a list of supported devices by this custom component?
Best, Viv
I have LG Styler and it works.
I think that anyone that is using this integration could provide here detail of working device (Type and Model should be ok) so that we can create list. I will pin this issue to highlight request.
LG refrigerator model GSJ470DIDV, product code GC-J247SQUV_ADSQEUR working flawlessly on version 0.9.3

Working: LG Washer WM4000HWA LD Dryer DLGX4001W Now also working: LG Dehumidifier UD501KOJ5 Updated with working dehumidifier.
Working: Conditioner LG B09TS Washer LG AI DD F2V9HS9W
Working:
Refrigerator : GBB72MCUDN

Working: Refrigerator : GBB72MCUDN
Very timely posted the info. Thanks. I just needed to find out about the refrigerator from LG. I'm looking at this model GA-B509MVQM and apparently he will have the same as you. After all, they are essentially the same
Working: Washer LG F4WV408S0E
LG QuadWash XD3A15NS Dishwasher working. Thanks for your work!

working: LG Air Conditioner PM18SP.NSK LG Air Conditioner PM05SP.NSJ
Working:
LG Dryer RH90V5AV6Q

LG Washer F4WN608S1 Vivace

Does anyone have LG Dishwasher DF425HSS ?
I have a full suite of LG appliances and they all seem to be working - though some of the devices came through with unnecessary entities I'm working through (like "salt refill" on my dishwasher that doesn't take salt) but working great even still!
Refrigerator - LFXS26973S Dishwasher - LDT7808SS (aka LDT7808 stainless steel edition) Oven - LSE4617 Washer - WM4500HBA Dryer - DLEX4500b
Is LG WH27S supported?
not support dehumidifier: MD161QBK3
Working: Dehumidifier-MD171QSK1 Dehumidifier-MD161QBK1 AirPurifier-AS551DWS0
Working:
- Cassette-AC:
modelName: RAC_056905_WW deviceCode: AI01 firmware: 2.6.7_RTOS_3K modelNm: RAC_056905_WW-RAC
LG WH27S heatpump boiler does not show up on the integration after reload and reboot.
Guess that's not supported yet. Too bad because I wanted to use the status of my boiler and shower lights as trigger for the fan.
LG Vivace Washer/Dryer F2DV5S8S2
Any plan to water purifier? I want to get info that how much water is spent.
RAC_056905_WW-RAC (AC) LG clip_hna_v1.9.161
Working wonders:
- washer/dryer Vivace VC4 / CV5010WG4
- AC units: Split Voice 12/18.000 BTUs (S4UQ12JA31F.EB1GAMZ & S4UQ18KL31A.EB2GAMZ)
Working with:
LG Fridge LG GBB62PZHMN

LG Dishwasher: DF325FP

HVAC working ( mostly )
modelName: RAC_946001_DK deviceCode: AI01 fwVer": 1.1.6 modelNm: "RAC_946001_DK model: RAC_946001_DK-RAC (AC)
modelName: RAC_493109_DK deviceCode: AI01 fwVer": 1.1.6 modelNm: RAC_493109_DK model: RAC_493109_DK-RAC (AC)
Both being managed by WIFI module PCRCUDT2
Only a few swingmodes works. Rest throws an error: Failed to call service climate. set_swing_mode.
"swing_modes": [ "VerticalOff", OK "VerticalTop", Not OK "VerticalMiddleTop1", Not OK "VerticalMiddleTop2", Not OK "VerticalMiddleBottom2", Not OK "VerticalMiddleBottom1", Not OK "VerticalBottom", Not OK "VerticalSwing", Not OK "HorizontalOff", OK
"HorizontalLeft", Not OK "HorizontalMiddleLeft", Not OK "HorizontalCenter", Not OK "HorizontalMiddleRight", Not OK "HorizontalRight", Not OK "HorizontalLeftHalf", Not OK "HorizontalRightHalf", Not OK "HorizontalSwing" No OK ],
I have:
- Fridge - LRFXC2416D
- Washer - WM3600HVA
- Dryer - DLE3600V
All of them work great in HA. The features in the Thinq app that are not in HA are:
- Energy monitoring (all 3 devices)
- Washer - Tub Clean Couch - recommendation for when to run Tub Clean Couch ( number of cycles since it ran last) and trigger to start it
- Fridge - Craft Ice Mode (6 Ice Mode or 3 Ice mode)
- Fridge - Peak Energy Saver and Seasonal Energy Saver toggles
- Fridge - Filter sensors for Fresh Air and Water
There are already some feature requests for some of these.
HVAC: LG Standard 2 (S12ET) 2,5kW and 3,5kW
RAC_056905_WW-RAC (AC)
by LG
Firmware: clip_hna_v1.9.183
Dishwasher: DF222FWS Washing machine: F2J7HY1W
Everything works fine.
Fridge LG GBB72SADFN works great in latest HA/HA-ST-Sensors.
Hi, From some comments above, I read, that the WH27S (and probably) the WH20S are not yet supported by this integration... Does anyone have some news about these devices?
I am planning to get a HeatPump for warm water - and one aspect I am looking for is the possibility to integrate the device into HomeAssistant... Either by a custom integration (Cloud, etc.) or local connection using Wifi, Modbus or anything else...
So I would really like to know, if the WH20S / WH27S would be supported - and if not, what might be required to get support for these devices :)
Else, I need to continue to search for another option...
Water Heater support was introduced by PR #420 on December 9, 2022
I can confirm that the WH27S works great and power usage is very accurate compared to the diy meter I used next to the breaker.