ole00

> why is the GAL type wrong the first time, > right the second time, and wrong the third time? I can only speculate, possible reasons or combinations. The issue...

Hi, I've enabled "Discussions" tab - feel free to share your thoughts. The issue you described - it might be caused by the change introduced in version 0.4 : baud...

I think you made good progress. > The whole transmission of adress-numbers is always done twice. It is not done twice. GAL16V8 has 32 so called 'rows' (or addresses) which...

> Would this just run on the Mega since they seem to have the I/O port in similar places? I don't have Mega board, so I can not verify it...

Yes, R1, R2, R3 are the same resistor value 4k7 (I think I also used 5k and it worked OK). The value for R1,R2,R3 is mentioned in schematic.

Thanks for the report. It should be now fixed. See commit 0761907

Hi, thanks for the report. It looks like a neat build. To answer your questions: * the number after the "read:" is the total characters read from the serial line....

I'm glad the 16V8B works for you. I got the ATF16V8C in the meantime, tried few tricks I mentioned earlier but I had no luck making it to work with...

Just an update: ATF16V8CZ is now supported in the latest code.

Not as a drop-in replacement (that is, without Arduino code changes) . The reason it's not possible as a drop-in replacement is that 4151 has 257 tap values, while 4131...