ole00

OK. I was thinking about another solution, to me so far without big flaws. Check the image bellow.  The original MOSFET (1) would stay, but another one would be...

Thank you for the report and the ideas. I don't have the original arduino, I have only 2 different (and cheep) Asian arduino clones which so far worked OK for...

> the power problem arose before it was plugged in - just trying to set the voltage initially That's weird. I would not have expect that. I've experienced the buzzing...

Thanks for the reports. I've isolated the MT3608 and connected is solely (without afterburner) to the Arduino's 5V rail via switch. When I turn on the switch the voltage on...

@lond131421 : can you give an example of the JED file, that does not work for you?

> Please refer to the data read before erasing and the data written to test.jed after erasing, which is completely incorrect.&nbsp 1) Please list the contents of the test.jed here,...

OK. no problem. I'm glad it works for you now.

I doubt the PAL chips would work. The Lattice GAL20V8B does work with an adapter.

Nobody reported that PAL's would work with Afterburner. I do not have any available to try out myself, and I could not find any available to buy, not even on...

Hi, sorry for the late answer. I completely missed your question. I checked GAL20V8**D**, but could not find any supplier of that chip. I could find GAL20V8**B** which is tested...