afterburner
afterburner copied to clipboard
ole00
GAL chip programmer for Arduino
In line 188 in the **printHelp()** function the serial baud rate used is incorrectly specified. The help text says 38400 but the code uses 57600. In addition in **printHelp()**, the...
Do you think there would be enough space on the Uno to add in XSVF programming such that the ATF150x CPLD chips could be programmed via JTAG? They also work...
I propose a simplified form of voltage measurement in the Afterburner. This affects the **varVppMeasureVpp()** function in **aftb_vpp.h** and some definitions. The mathematical basics: ADC = return value of analogRead()...
I have built v3.1a pcb using SMT components, a good MT3608 module but I am still having issues with afterburner calibration.  In order to get detailed info I have...
See https://github.com/ole00/afterburner/issues/54
I just put together an Afterburner, and I had a heck of time trying to get it calibrated. I eventually figured out that the MT3608 module that I was using...
So I've tried 57600, and it's pretty hard to get it to work reliably. I would prefer 115200, only my MCP2200 serial chips work at 57600. I think it would...
is it possible, to change the MCP4131 with the 4151 because of availability? It's hard to find these part here in germany. But the MCP4151 is available.
Typo
The conosle prints "GAL20V10" when there is a GAL22V10 inserted I´m guessing it´s a typo becouse of this line in the arduino code: "case GAL22V10: Serial.print(F("GAL20V10 ")); break;" Also I...
This is a part from Texas Instruments. I have not found any concrete reference to it in the readme or in discussions here so I'm curious if anybody tested that...
