Ola Lidholm

If you set only P1 the same limit is applied also to P2 and P3. But you can also set each one to a different value if you add all...

It works together with equalizer. The lowest limit of all the possible limits will "win" always, so if your circuit dynamic current limit is lower than what the equalizer thinks...

It is the way the charger dynamic limit works, it is only valid until the car is unplugged. The circuit dynamic limit is different, it retains the value you have...

> > Do you have the chargers on the same circuit master and slave? I have them on same circuit and need to use Switch turn off on the other...

If the chargers are configured as being on the same circuit, then the dynamic circuit limit will affect both charger on that circuit. Dynamic charger limit will affect only that...

> @Mats1717 Tried to find any info on how to set both chargers as `master`, but couldn't find it. Do you know where I can find it? > > Thanks...

In theory the start/stop commands (which are available as services) should do just that. See https://developer.easee.com/docs/settings I have never personally tried it though, I have no need for that function...

First, easee.set_circuit_dynamic_limit and easee.set_charger_circuit_dynamic_limit are the exact same thing in the sense that they end up calling the same API in the end. The only difference is that with easee.set_circuit_dynamic_limit...

Forgot to say, since you say that the limit that changes is the app is "Dynamic limit for Chargingrobot", that too points to that you have accidentally actually used the...

I think what you are calculating is not the actual limit to set, but the error, i.e. how much you need to change your setting. So if you already have...