expand the configuration to use 2 dtu devices

[ohAnd]

Hi, I am using a grid with two dtu's. Can you expand the configuration to use 2 dtu devices? The total value (or/abd dtu 1 + dtu 2 vaule) should be visible on the OLED SH1106. Tx. I am using the ESP32 version on the ESP32 WROOM Dev Kit. Tx.

Originally posted by @wesseli01 in https://github.com/ohAnd/dtuGateway/discussions/43

[ohAnd]

from #43 ...

• only displaying a summary of connected DTUs - no power controlling
• connection to each dtu can be alternating based on the dtu refresh cycle setting

open @wesseli01 :

which additions for which values should be done and shown? => the same current dtu1 values in the web front end for the 2nd

means what in your opinion in detail for web ui and display (both display types) ?

which powersetting should be shown, only the highest, an average between both, or ..? => current sum value (dtu1 + dtu2) on display

powersetting from my point of view means the percentage of the power limit for the inverter - why should it be useful to sum the percentage?

I'll close the discussion issue to detailing the needs/ wishes here...