Jesse Vincent
Jesse Vincent
@xsuryanshx by all means. Please just send a PR. Thanks!
Closing as likely duplicate of #232 (OpenCode Windows module resolution failure). If this was a different issue, please reopen with additional details.
Yes! I'd love to have superpowers integrate with...everything. Have a look at how we did the codex setup.
Ok. This is a test build. You can install it by plugging in your preonic while holding in the Hyper key. you'll see a PREONICBOOT drive show up on your...
@jeroenleenarts Thanks so much for testing this out. After you powered it off and on, did you need to 'pair' again, or did it connect automatically after you turned the...
@ScriptingNose Here's a great place to be discussing. "Initial pairing ONE preonic to ONE device works and also seems to be quite stable and sturdy. The very moment I hit...
@ScriptingNose just after you configure the preonic to be able to talk by bluetooth on device #1, if you plug it into a computer, does it switch to talking to...
@ScriptingNose - I'm having trouble duplicating the problem you're describing. It *sounds* a lot like you've got a corrupt flash filesystem, but if you've run through the full recovery procedure...
@hwangy that's super-fascinating. Are you currently on 0.93? How reliably can you replicate the problem? Is it *only* after you've used the rotary encoder/knob? On Fri, Aug 22, 2025 at...
> > @obra With the last firmware I don t have the > problem actually but as the problem is not every times, I will post it > again if...