dji-firmware-tools
dji-firmware-tools copied to clipboard
gimbal calobration: Mavic 3 pro
I try to mavic 3 pro gimbal calobration and it not work, some one already try it? Pleace help me.
Hello, help please I am in the same situation yet there is the wm260 command for the mavic 3 but no com port or bulk ?
I try to updateing pip and l get error: no backend available, lm a beginner on python and still figue it out
Try to enter this commands: python -m pip install pyusb *then pip install libusb *then download and install this file (libusb-win32-devel-filter-1.2.7.3.exe) and remove all filters After this maniplations everything should work
Hello, help please I am in the same situation yet there is the wm260 command for the mavic 3 but no com port or bulk ? Try to do that way py comm_og_service_tool.py --bulk WM260 GimbalCalib JointCoarse
Hi there
I installed everything as you wrote, according to the instructions:
python -m pip install pyusb
*then
pip install libusb
*then download and install this file (libusb-win32-devel-filter-1.2.7.3.exe) and remove all filters
Then:
cd
cd dji
py setup.py install
py comm_og_service_tool.py --bulk WM260 GimbalCalib JointCoarse
But an error appeared: Error: Unrecognized response to calibration command JointCoarse request.
How to fix it?
Hi there I installed everything as you wrote, according to the instructions: python -m pip install pyusb *then pip install libusb *then download and install this file (libusb-win32-devel-filter-1.2.7.3.exe) and remove all filters Then: cd cd dji py setup.py install py comm_og_service_tool.py --bulk WM260 GimbalCalib JointCoarse
But an error appeared: Error: Unrecognized response to calibration command JointCoarse request.
How to fix it?
To tell the truth, i don't know. If you will find solution, please write here
https://github.com/o-gs/dji-firmware-tools/issues/178