dji-firmware-tools
dji-firmware-tools copied to clipboard
Thanks brother, but i have same error issue with mavic 2 battery, should i do the same? Do you mean i will use jumper wire from charger terminals to the bms board?
Thanks brother, but i have same error issue with mavic 2 battery, should i do the same? Do you mean i will use jumper wire from charger terminals to the bms board?
Sent from my iPhone
On Jan 21, 2022, at 3:02 AM, KnusperKnusper @.***> wrote:
CP2112 and Mavic air 1 instrucion with ERROR 0X00:
Open Battry, Connect Charger to battery, Bridge PIN +13V to the Side of the battery where +13V would be or charge every cell on its own, connect SDL SCA and GND. If error appears switch sda scl.
Connect in the software, unseal etc...
— Reply to this email directly, view it on GitHub, or unsubscribe. Triage notifications on the go with GitHub Mobile for iOS or Android. You are receiving this because you commented.
Originally posted by @dronythinggoes in https://github.com/o-gs/dji-firmware-tools/issues/196#issuecomment-1018174323
Hi, same problem to me! Have you ever get any idea how to handle the knusperknusper doing. Could it be that there is no power supply for the mavic board? 🙋♂️