dji-firmware-tools icon indicating copy to clipboard operation
dji-firmware-tools copied to clipboard

Published 20 hours ago • verified publisher icon o-gs

Mavic Mini gimbal calibration

Open johnsmotors opened this issue 3 years ago • 4 comments

Hello guys,

I dont find comport of my mavic mini. i just have this: USBSTOR\DISK&VEN_DJI&PROD_WM160&REV_1000\0001&0 no com port. so i can't do this command: python comm_og_service_tool.py com1 MMINI GimbalCalib JointCoarse

Please someone can help me?

johnsmotors avatar Jul 15 '20 13:07 johnsmotors

Hi, Have you already installed the DJI Assistant 2 For Mavic? It contains the necessary drivers to connect your mavic mini to the pc. Once you install it and connect the drone to the computer, it should appear on your device manager (if you're using windows). Regards

ebarcelos avatar Jul 16 '20 12:07 ebarcelos

hello, good idea.. i ll try it!! thanks

johnsmotors avatar Jul 17 '20 13:07 johnsmotors

Hi, Have you already installed the DJI Assistant 2 For Mavic? It contains the necessary drivers to connect your mavic mini to the pc. Once you install it and connect the drone to the computer, it should appear on your device manager (if you're using windows). Regards Not sure if i could post comment here. I try to run py comm_og_service_tool.py com3 mmini GimbalCalib LinearHall

Info: The Gimbal will slowly move through all positions in all axes, several times. It will take around 30 seconds.

Error: Unrecognized response to calibration command LinearHall request. i saw the gimbal moving, is that ok when this error appear. It not receving report back and pass like what i saw on some youtube video of spark. thanks in advance

tranngoclinhbk avatar Jul 31 '20 07:07 tranngoclinhbk

Hello guys,

I dont find comport of my mavic mini. i just have this: USBSTOR\DISK&VEN_DJI&PROD_WM160&REV_1000\0001&0 no com port. so i can't do this command: python comm_og_service_tool.py com1 MMINI GimbalCalib JointCoarse

Please someone can help me?

You can solve this problem like this. Step 1 Dji Mavic assistant open. Step 2 Open a drone. Plug in Usb Cable in 3.20 Seconds. It will appear as USB Serial Com4 in Device Manager. 4. Close Dji Assistant. 5. Enter the relevant command.

pilgrimage80 avatar Nov 03 '20 08:11 pilgrimage80