dji-firmware-tools icon indicating copy to clipboard operation
dji-firmware-tools copied to clipboard

Published 20 hours ago • verified publisher icon o-gs

Mavic Mini support for replaced gimbal/camera

Open OlafWinkler opened this issue 4 years ago • 10 comments

Hello, Great tool here, great work! I had to replace my Mavic Mini's gimbal/camera after a crash. I bought a new system from another disassembled Mavic Mini on Ebay and also a new flat ribbon cable with the compass (?) sensor. The drone is okay now and flies and records, but there are still errors 40011 and 40021 reported in the app. Any chance that you can improve this toolset to fix this problem? I have already run GimbalCalib JointCoarse and LinearHall. Each with bad response error, but the drone performed as expected, still errors 40011 and 40021 persist. Thanks for the great work. Best regards, Olaf

OlafWinkler avatar Jun 12 '20 23:06 OlafWinkler

Exactly the same here mate.

kRtUk avatar Sep 13 '20 22:09 kRtUk

did you solve this issue? I had the same problem after gimbal+camera replacement in mavic mini

yakaracolombia avatar Oct 29 '20 17:10 yakaracolombia

Hello, Great tool here, great work! I had to replace my Mavic Mini's gimbal/camera after a crash. I bought a new system from another disassembled Mavic Mini on Ebay and also a new flat ribbon cable with the compass (?) sensor. The drone is okay now and flies and records, but there are still errors 40011 and 40021 reported in the app. Any chance that you can improve this toolset to fix this problem? I have already run GimbalCalib JointCoarse and LinearHall. Each with bad response error, but the drone performed as expected, still errors 40011 and 40021 persist. Thanks for the great work. Best regards, Olaf

Drone gimbal Not Working Did it work even though you gave this error?

There must be some way to get around this error? Before I did this calibration setting it was just giving 40002 error. After calibration error 40011 has been added.

pilgrimage80 avatar Nov 03 '20 08:11 pilgrimage80

My Mavic Mini still shows the errors, but the gimbal is working ok. So, basically, no big thing here. But it would be nice to get rid of the error messages. My understanding is that the gimbal needs to be properly introduced to the main board. But that seems to be a complicated programming mechanism which is probably held secret by DJI in order to encourage customers to use DJI service centers (or to buy other drones next time).

OlafWinkler avatar Nov 03 '20 09:11 OlafWinkler

removing the error 40011 is easily solved, while for the error 40021 it is necessary to bind the core board with the gimbal using tool dji and vpn

nettunoroberto avatar Dec 06 '20 19:12 nettunoroberto

try downgrade and upgrage,if anyone made it fixed pls leave a message here

denverhan avatar Dec 16 '20 14:12 denverhan

Here I am with the same problem after replacing the gimbal, the APP presents the error 40021, I am looking for a solution, many say that only official DJI software can solve it.

JefDrones avatar Apr 09 '21 19:04 JefDrones

removing the error 40011 is easily solved, while for the error 40021 it is necessary to bind the core board with the gimbal using tool dji and vpn

Can you solve 40021

954426470 avatar Oct 24 '21 06:10 954426470

removing the error 40011 is easily solved, while for the error 40021 it is necessary to bind the core board with the gimbal using tool dji and vpn

Can you solve 40021

I can

954426470 avatar Nov 06 '21 12:11 954426470

Who needs remove error 40011 or 40021, you can write me on WhatsApp +62 812-8430-9143

alxgacc avatar Oct 14 '22 04:10 alxgacc