Mavic Mini uses comm_og_service_tool can't work normally

[9844201]

My Mavic Mini uses him and can't work normally

C:\Users\Martian\Downloads\dji-firmware-tools-master>py comm_og_service_tool.py -vv com6 MMini GimbalCalib JointCoarse Opened com6 at 9600

Info: The Gimbal will move through its boundary positions, then it will fine-tun e its central position. It will take around 15 seconds.

Prepared binary packet: 55 0e 04 66 0a 04 89 9a 20 04 08 01 36 79 Sending packet... Waiting for reply... Retrieved 1 packets (14b), dropped 0 fragments (0b) Received response packet: 55 0e 04 66 04 0a 89 9a 80 04 08 01 27 6d Error: Unrecognized response to calibration command JointCoarse request.

C:\Users\Martian\Downloads\dji-firmware-tools-master>py comm_og_service_tool.py -vv com6 WM160 GimbalCalib LinearHall Opened com6 at 9600

Info: The Gimbal will slowly move through all positions in all axes, several tim es. It will take around 30 seconds.

Prepared binary packet: 55 0e 04 66 0a 04 32 a2 20 04 08 02 0b 2a Sending packet... Waiting for reply... Retrieved 1 packets (14b), dropped 0 fragments (0b) Received response packet: 55 0e 04 66 04 0a 32 a2 80 04 08 01 81 0c Error: Unrecognized response to calibration command LinearHall request.

[9844201]

C:\Users\Martian\Downloads\dji-firmware-tools-master>py comm_og_service_tool.py -vv com6 MMini GimbalCalib JointCoarse Opened com6 at 9600

Info: The Gimbal will move through its boundary positions, then it will fine-tun e its central position. It will take around 15 seconds.

Prepared binary packet: 55 0e 04 66 0a 04 89 9a 20 04 08 01 36 79 Sending packet... Waiting for reply... Retrieved 1 packets (14b), dropped 0 fragments (0b) Received response packet: 55 0e 04 66 04 0a 89 9a 80 04 08 01 27 6d Error: Unrecognized response to calibration command JointCoarse request.

C:\Users\Martian\Downloads\dji-firmware-tools-master>py comm_og_service_tool.py -vv com6 WM160 GimbalCalib LinearHall Opened com6 at 9600

Info: The Gimbal will slowly move through all positions in all axes, several tim es. It will take around 30 seconds.

Prepared binary packet: 55 0e 04 66 0a 04 32 a2 20 04 08 02 0b 2a Sending packet... Waiting for reply... Retrieved 1 packets (14b), dropped 0 fragments (0b) Received response packet: 55 0e 04 66 04 0a 32 a2 80 04 08 01 81 0c Error: Unrecognized response to calibration command LinearHall request.

C:\Users\Martian\Downloads\dji-firmware-tools-master>py comm_og_service_tool.py -vv com6 MMini GimbalCalib JointCoarse Opened com6 at 9600

Info: The Gimbal will move through its boundary positions, then it will fine-tun e its central position. It will take around 15 seconds.

Prepared binary packet: 55 0e 04 66 0a 04 56 2d 20 04 08 01 24 6f Sending packet... Waiting for reply... Retrieved 13 packets (304b), dropped 0 fragments (0b) Received response packet: 55 0e 04 66 04 0a 56 2d 80 04 08 01 35 7b Error: Unrecognized response to calibration command JointCoarse request.

C:\Users\Martian\Downloads\dji-firmware-tools-master>py comm_og_service_tool.py -vv com6 WM160 GimbalCalib LinearHall Opened com6 at 9600

Info: The Gimbal will slowly move through all positions in all axes, several tim es. It will take around 30 seconds.

Prepared binary packet: 55 0e 04 66 0a 04 2c 5d 20 04 08 02 43 a4 Sending packet... Waiting for reply... Retrieved 1 packets (14b), dropped 0 fragments (0b) Received response packet: 55 0e 04 66 04 0a 2c 5d 80 04 08 01 c9 82 Error: Unrecognized response to calibration command LinearHall request.

[pilgrimage80]

I am getting the same error on the Mavic mini. Did you solve the problem?

[denverhan]

what do u expect? pls descripe your issue so someone can read it