turbo-resin
turbo-resin copied to clipboard
nviennot
Open-source firmware for resin printers
It seems that `rust-toolchain.toml` has no effect on build: `make build` fails if the default toolchain is set to `stable`. But if renamed to `rust-toolchain` (without extension) then it works...
Would it be possible to use a RasperryPi and it GPU to render images to the LCD screen? Use the Pi's serial port to control the printer mainboard? Incorporate this...
Mars3 owner reporting in here. I have opened up my machine and can verify it is indeed using this board: https://www.chitusystems.com/product/chitu-m20-motherboard-use-with-6-6-4k-mono-lcd-monochrome-with-chitusystems-for-elegoo-mars3/
  I went ahead and connected to the serial port and didn't really get anything useful out of it. The entire board can be powered via the serial header,...
I don't see any version reported on the board (access is more difficult than the Mars 2, I may have missed it), but general aspect seems to confirm it's the...
Are you going to add gcode control support via the serial pins in the wifi header? That would allow for wifi or remote control via the Octoprint-Chituboard plugin. https://github.com/rudetrooper/Octoprint-Chituboard Gcode...
Hi, This is the board used by my Elegoo Mars 2 (apprently, it's the same for Elegoo Mars 2 Pro, many components in the Mars 2 are even labelled "Mars...
I have the SE and I'm interested in helping you support my printer! Unfortunately, it's clear to me that your chops are somewhat in advance of my own, so my...
Since Photon Mono uses same board and chassis as PM4K and only difference is screen size I think supporting PM should be quite straightforward unless I am missing something. Compared...
What is necessary to get photon S support working. The board is fairly standard so I guess there'll be some interrogation required to get the set up just right. I...
