Nick Steinmetz

I think you should try putting a breakpoint on that line with the error (142) and see what the size of things are and why it has a problem. And/or,...

Yes, you have ops.NChan=32, but you should update ops.NChan to be sum(connected). On Thu, Jun 7, 2018 at 11:26 AM veronikasamborska1994 < [email protected]> wrote: > Thanks a lot for your...

My setup was always like this: one reference on the skull (either skull screw or saline bath with silver wire in it); each probe has ground shorted to external reference;...

Hi - I'm not familiar with TPrime, however, I would suggest that the only way to be certain for yourself is to duplicate a signal into the auxiliary channels for...

I don't think there's a minimum time but as you say longer should be better. I tend to always go for at least 30-45 minutes, but I don't have any...

Hi, please contact the authors of that paper. This website is not affiliated with IMEC. On Tue, Nov 23, 2021 at 11:54 AM ahmedmoe ***@***.***> wrote: > Hi, > I...

Yes they are physically the same, but no, you can't use them like normal recording channels. On Fri, Jun 7, 2019 at 11:23 AM Adrian Gopnik Bondy < [email protected]> wrote:...

Thanks for making this kind of careful measurement, which actually I had not made myself before. I passed the issue on to some people who might be able to help...

Personally I'm not using this function - I think it has the right idea but is confounded by drifting units. I don't know which would work better between the options...

I use 960 for phase3A probes. On Sat, Feb 3, 2018 at 1:10 PM, PhantomSpike wrote: > Hi Nick, > > Many thanks for your quick reply! > > When...