Nathan Seidle

You're sort of correct. Currently the library is hardcoded on [this line](https://github.com/sparkfun/SparkFun_MAX3010x_Sensor_Library/blob/master/src/MAX30105.cpp#L153) to check for the correct ID from the MAX30105. I haven't played with the MAX30100 but I have...

Thanks for the PR! Looks pretty good but the only change I see in this pr is the addition of a few comments:  Is that your intent?

Got it. Thanks for the explanation. Images would be helpful for me.

Hi - this is very exciting! I encourage you to continue however the floating point calculations and manipulations may require more RAM than is available on a 328 based Arduino.

Looks pretty good. But how did AK8963_ADDRESS get in there?

Sorry - I should have looked at the source. I didn't realize there was an AK8963 in there for the mag.

@asachs01 - Any luck? We're not really ruby folks. Let us know if you were able to hook in to the serial stream. It would be helpful to know for...

Hi @mbuyikamba - It sounds like you may have your load cell wired incorrectly to OpenScale. If possible, can you snap a photo of where the wires enter the screw...

Have you been able to use the URA to read the tag? If the URA cannot read it then it may be something lower level than what the Arduino library...

Thanks for trying out the panelizer! We use it multiple times a day, but there's some quirks because we really built it for us, not a general tool. I recommend...