rpi-firmware

rpi-firmware copied to clipboard

sudo nano /usr/share/X11/xorg.conf.d/99-fbturbo.conf

1

Hello, I want to set up a Waveshare 3.5 Spotpear following instruction #215 i use raspberry pi3 and jessie os. when i start step two from sudo brew to Change...

irfanmyasin

Waveshare 3.2inch rpi lcd for the Raspberry

82

Is there any support for this display coming up ? http://www.wvshare.com/product/3.2inch-RPi-LCD-B.htm I have btw the previous version (without the B). Erik

videobuff

beattie

comitservice

Did Waveshare 3.5 inch work on Raspberry pi B+?

1

i buy 3.5 inch from http://www.ebay.com/itm/181865997171?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT did it work on Raspberry pi B+ Jessie? i download driver and tar xvf LCD-show.tar.gz => cd LCD-show => sudo ./LCD35-show screen alway white...

Jakkawad

tm022hdh26 or ili9431 not work

9

I use Model B+ on Jessie 1. Open SPI 2. sudo nano /etc/modprobe.d/raspi-blacklist.conf -> #blacklist spi-bcm2708 3. sudo REPO_URI=https://github.com/notro/rpi-firmware rpi-update 4. /boot/config.txt -> dtparam=spi=on 5. sudo nano /etc/modules -> fbtft_device...

Jakkawad

Hi my name is Sam ( I am quite new to Raspberry Pi but know how to format SD cards and know how to set up Noobs and other OS's)...

Sam200029

AdaFruit RA8875 board and TFT only showing white screen

4

Hi, I have a reclaimed 4.3" TFT, 40 pin model FPC4304009 that I pulled from a MP4 player I got for free a while back. I have not been able...

elliottcarlson