the hardware design open source

[dqsh06]

Hello, I know this is a open source product for canable2.0, here is the source code of firmware, but where can i get the source of hardware, for example, the schematic, the bom and so on?

Thanks. dqsh

[Elmue]

There are lots of hardware versions. It depends on the processor and the company. The ONE AND ONLY CANable hardware does not exist.

MKS Makerbase has designed a board for the STM32G431 processor: https://www.aliexpress.com/item/1005006281907848.html

You can find at least a diagram (only for version 2.0) and PCB design (only for version 1.0) at MKS Makerbase: https://github.com/makerbase-mks/CANable-MKS/tree/main/Hardware But they only uploaded this as PDF.

Other Chinese companies make their own board design like for the STM32F072 processor. For example https://www.fysetc.com/products/fysetc-ucan-board

You will have to write them and ask if they share their PCB design with you. But for a board on which they earn only 8 dollars you cannot expect any support.