Using other pin for fan supply?

[kyet]

Based on the below link, https://rabbithole.wwwdotorg.org/2017/03/28/esp8266-gpio.html

D5 is high, then low after ~110ms as you noticed. But D1, and D2 are low on boot/flash.

If we use D1 or D2 instead of D5, we could not need a workaround that outputs PWM 100% for the turn-off.

I didn't test yet. Just an idea. What do you think?

[nordeep]

Thank you. It makes sense. I'll test this later.