Mendel90
Mendel90 copied to clipboard
nophead
A RepRap Mendel variant using sheets for the frame instead of rods
Hey! :-) could you maybe add a github repo description (plus tags), and also describe in the README on top what this project is (about)? would be appreciated! robin
Still needs wire holes but those could be a copy of the access holes allready placed. Just copy and rotate 90 degrees
The Dibond version crashes the extruder motor into the into the top z-bar clamp. This has happened to me a couple of times now. When homing the z-axis while at...
Here I hope to show you what I have done to svg.py to add a background grid to the svg sheets. The idea came from http://woodgears.ca/bigprint/
... printing. The inner part of the duct has very little contact surface with the build platform. This version has a single-layer-thick connection between the inner and outer parts to...
Had to downgrade to 2.64 r51026 (although I only tested 2.66 SVN and 2.66 current official release.) Running under 2.64 with no problems. Tracked it down to viz.py the command...
In case anyone is interested in generating a bom csv, here is a little diff to sort out the columns and such. I just copy and paste this code into...
Any interest in a Makefile based build system? The advantage would be the ability to not recompile/rebuild files that haven't changed. I think right now ./make_machine.py always rebuilds everything, and...
E.G. Buddaschnozzle. It would require moving the the third bearing off centre, moving the extruder back a few mm and making the hole bigger.
