Wont open chat mode?

[Nikol121]

this is what i get what do i do?

[marcostga]

estou com o mesmo problema

[josergc]

did you press ctrl+c after the message of "sampling parameters: ..."? It took a long while in my computer before to have the prompt ready for testing.

[RexChestir]

Same. Loading without problems and doesn't "chat mode"

[Bodiyx]

I have the same problem.

[Nikol121]

did you press ctrl+c after the message of "sampling parameters: ..."? It took a long while in my computer before to have the prompt ready for testing.

i didn't click anything just dropped file and opened exe

[RedTrainerF]

Pump here, it just doesn't work, can we please get any advice on this?

[GerrysTech1]

I have the same problem, but noticed a file access error in the windows event log. The bin file is on my c: drive, so its not network related.

Checked the MD5 hash but it was OK. Downloaded the bin file again, still have the problem. Ran as Admin, still have problem. Plenty of HDD space. Ran error check on drive. Rebooted PC. No sure what to do next.

Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program gpt4all-lora-quantized-win64.exe because of this error.

Program: gpt4all-lora-quantized-win64.exe File:

The error value is listed in the Additional Data section. User Action

1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
   • It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
   • It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.

Additional Data Error value: 00000000 Disk type: 0

[GerrysTech1]

same file different pc, looks like the actual issue is that it needs AVX2 support?

[niansa]

Stale, please open a new issue if this is still relevant.