nomadbyte

> ... it's possible to load "wide" effects into all of the allotted 5 positions in the chain (thus with 5*2=10 total page count). However, in practice this would be...

> ...the pedal's DSP hardware itself is capable to operate "wide" effects in all of the 5 positions in the chain (up to the DSP load capability). Confirmed. The G1...

@shooking: If you've a chance, could you also check the G5n output from the following SysEx commands? 0x55: f052006e55f7 0x44: f052006e44f7 (0x64, 0x0a): f052006e640af7 If you have G3n (emulated on...

@mungewell: If you still have the GCE-3, maybe you could try getting the output from the `0x55` (model info), `0x44` (bank info), and `(0x64 0x0a)` (settings info) SysEx commands while...

Thanks! That's the info I wanted. Can't say this makes it all clear but for sure it gives more details. Will be looking into the outputs. Yeah, I saw the...

For completeness G1 FOUR: ``` amidi -p hw:1,0,0 -S "f0 52 00 6e 55 f7" -t 1 -r temp.bin ; hd -v temp.bin 96 bytes read 00000000 f0 52 00...

> ...This is what I thought the '0x44' message meant. There's more detail in the output. It may deal with how to format the patch number. You may see that...

Can you also dump the `0x48` command output for the G5n and G3n? It also queries some model details, apparently something like max number of patch slots.

Thanks for the quick response! As we're at it now, could you dump the same `0x48` for G3Xn (the one with the pedal) and B3n, not sure if the GCE-3...

Thanks for the dumps.