Taper on load axis on acc enrich

[runesmdk]

Like the rpm-taper, is it possible to add a load-axis taper (map or tps)? Driving with throttlebodies and having the injectors somewhat away from the cylinderhead makes the fuel behave not nice during transients with vacuum, needing quite a bit of acc enrich at low to mid tps transient. Going from mid to high tps gives same enrich, but since "manifold pressure" doesnt change at that tps range, it overfuels and bogs. It is nearly impossible to smooth out without loosing either top or bottom drivability.

So in short; Can a load taper be added, just like rpm taper? Or is it possible for a 4x4 table to do a acc.enrich multiplier lookup, with x as rpm and y as load/tps? Like 100% acc enrich at 1000rpm 0% tps(start point), and 25% acc enrich at 4000rpm 50% tps(start point) ?