UsbAsp-flash

UsbAsp-flash copied to clipboard

Programming a flash with USBAsp could take a lot of time, e.g. 25Q127CS1G(16MBit) takes about a hour(at 1.5-3MHz SPI freq). When programming of such a big flash fails at some...

powerbroker

Does it work with the W25N01?

1

ArturoGuerra

I've searched through the chiplist.xml and cannot find the ST M95M02D EEPROM. Is it possible to add? the parameters are page=256 size=262144 x 8bits + 1 ID page (256 bytes)

TexNOz

Support for MX25L6436F

1

Hi, I tried to look at the chiplist.xml but don't understand all the parameters required to add a new chip MX25L6436F This looks similar to MX25L6436E id="C22017" page="256" size="8388608" same...

alexsda911

Possible to support eMMC ?

1

FT232H board possible to support eMMC?

Sumebody

Add gd25b64bpig

1

cant find that chip,tried gd25q64b and same versions but doesnt work

DagothMor

USING COMMAND LINE

1

Hello, i have a question: Can I use command line to flash my chip? i use AT24Cxx chip. Please help!

Vanbatai123

Cannot Read ID after playing with SREG bits

1

Hello all Using Dell Inspiron 15-3567 Bios version: 2.13.0 Programer: CH341a BIOS chip: MACRONIX 25L12873F I made a full dump of the working BIOS before the changes. Made some changes...

yderi

Hi I have a problem with ASprogrammer using CH341a . I Can write erase W25Q256FV correctly but when it comes to Programming the flash it writes the BIN file to...

arsz6733

Possible to support MX35LFxGE4AB SPI Nand ?

7

Datasheet is here: https://www.macronix.com/Lists/Datasheet/Attachments/7666/MX35LF2GE4AB,%203V,%202Gb,%20v1.7.pdf Is it possible at all to add support for this chip?

protocold