Dual dalylog and BMS

[Pinky-bit]

Hi all, is it possible to use two Daly Smart BMS at the same time and send data to emoncms with different prefixes? Thank you

[solarsnoop]

Just change the prefix to example solpiplog2 that's all. Than u find the data's in your mqtt broker under solpiplog2/daly

[Pinky-bit]

Just change the prefix to example solpiplog2 that's all. Than u find the data's in your mqtt broker under solpiplog2/daly

Ok, the data is seen by the mqtt broker, but I can't import this data into emoncms. I also tried different input methods in emoncms. It only sees the first bms.

[kxn25]

Have you made a copy of the Folder to run 2 instaceses?

[Pinky-bit]

Have you made a copy of the Folder to run 2 instaceses?

Yes!

[kxn25]

Thank you.

[Pinky-bit]

Thank you.

Were you able to publish data from both bms on emoncms?

[kxn25]

iam not using emoncms. And i have not orderd the second battery pack, just checking if posible.

[kxn25]

How can i setup daly log in autostart? sysctrl services?

[Pinky-bit]

How can i setup daly log in autostart? sysctrl services?

In my Raspy I copy it to /home/pi/.config/autostart

[kxn25]

Which of these files must i copy in autostart?

[Pinky-bit]

In autostart I copied the dalylog.desktop, file that I don't see in your directory.

[kxn25]

And how do i get this file? can you send me yours?

[Pinky-bit]

And how do i get this file? can you send me yours?

You can find it inside the dalylog_0.9.1.zip file

[kxn25]

Thank you i will try that.

[kxn25]

is it possible to get errors from the BMS?

[kxn25]

Just change the prefix to example solpiplog2 that's all. Than u find the data's in your mqtt broker under solpiplog2/daly

The SOC is always initalise between the two. I have disabled the second SOC switching. Is that normal? and will it switch the one i have enebaled?

@Pinky-bit it is still not working. Its not starting up!