Problem to connect to AP

[BigDi]

In version 0.3 is it "hard" to connect to the access Point. After some tries I got it working. But at the moment I have flashed again the the ESP will not connect. When the connect is working then I get a dump. I only see something with python.. After a couple of reset (doing nothing else) it working now.

Output from console:

SSID: XXXXXX Pass: ******** wrong action: , (updating: 1, connectingNow: 1) SSID: XXXXXX Pass: ******** wrong action: , (updating: 1, connectingNow: 1) SSID: XXXXXX Pass: ******** wrong action: , (updating: 1, connectingNow: 1) SSID: XXXXXX Pass: ******** wrong action: , (updating: 1, connectingNow: 1) SSID: XXXXXX Pass: ******** wrong action: , (updating: 1, connectingNow: 1) SSID: XXXXXX Pass: ******** wrong action: , (updating: 1, connectingNow: 1) SSID: XXXXXX Pass: ******** wrong action: , (updating: 1, connectingNow: 1) SSID: XXXXXX Pass: ******** wrong action: , (updating: 1, connectingNow: 1) reconnect state: 2 -> 0 (0) f r0, scandone state: 0 -> 2 (b0) SSID: XXXXXX Pass: ******** state: 2 -> 3 (0) state: 3 -> 5 (10) add 0 aid 5 cnt SSID: XXXXXX Pass: ******** wrong action: XXXXXX XXXXXX, (updating: 1, connectingNow: 1) SSID: XXXXXX Pass: ******** wrong action: XXXXXX XXXXXX, (updating: 1, connectingNow: 1) SSID: XXXXXX Pass: ******** wrong action: XXXXXX XXXXXX, (updating: 1, connectingNow: 1) Station configuration was updated to: XXXXXX f r0, SSID: XXXXXX Pass: XXXXXX SSID: XXXXXX Pass: XXXXXX