nikshriv

Just updated the integration to fail installation if your system does not meet all requirements.

The integration should support color as long as your light strip does. If you can run my cync_data.py script, you should be able to find the "deviceType" of your light...

Did you enable the motion/ambient light sensor in the Cync app when you installed the switches and configured them?

Your device type is already included supported by the integration. Are you still having trouble with this? It should work. Not sure what's going wrong. However, I don't have any...

I'm not sure what's going on. I do know that the sensors don't function in HA until a motion event or an ambient light change event has taken place after...

Run the script in a shell or from windows power shell on any computer with Python 3 installed using this command: “python cync_data.py” I don’t know which type of switch...

Also, check your HA logs for errors from the integration and post Get Outlook for iOS ________________________________ From: Nik Shrivastava ***@***.***> Sent: Friday, November 25, 2022 10:07:51 AM To: nikshriv/cync_lights...

I've had a chance to investigate this further. I believe you must be using one of the 3-wire (no neutral wire) switches with motion and ambient light sensor. I recently...

I'm not sure what you're requesting. The switches work just like any other switch in HA. Power state is reported as "off" when lights are off and "on" when lights...

Got it. Yes, connection status is a bit complicated. I haven't completely worked that out. I am able to detect whether devices are connected by WiFi and responding to commands...