Combo (ruffy) error: trying to set TBR=800%

[ga-zelle]

The pump showed an error "TBR cancelled" while AAPS 3.2rc1 kept interrogating the status and setting TBR=800%. I had to cancel the TBR manuuall a few times until AAPS wanted a TBR below 100%. Thsi never happened before. Using 32.rc1 for about 3 weeks.

In the relevant logfile there are messages that for safety reasons the TBR is reduced 800->500 but sometimes the same safety reasons reduce it from 800->800.

AndroidAPS.2023-10-12_02-00-22.15.zip

[jotomo]

@ga-zelle There are multiple limits applied: the Safety module sanitizes requests and the Combo plugin applies technical limits (max TBR of 500%). Ruffy is never asked to apply a TBR above that limit (grepping the log for 'Attempting to run cmd: SetTbrCommand'). Could you observe this further, I wouldn't know why the code (RuffyScripter hasn't seen any relevant changes in a while) would start to fail. Best guess would be a battery nearing its end and voltage fluctuations causing connnection issues.

[ga-zelle]

Good point, the battery is nearing its end. Still, it never happened in the last 4 years although I always run the battery until it reports empty. I intend to move to the new driver anyway before the clocks are set back in 2 weeks time.