Baro / Altidude doesn't show up as active in MP (board Omnibus F4 V3) (Copter-mode)

[diadem56]

Issue details

If I load the latest dfu-file from the latest zip folder from the copter folder (f4light_AirbotV2_bl.dfu : 930 KB) in MP baro/altitude isnt't active (it appears just a fixed number (e.g. 21.07), also when I raise the board).

If I load the latest dfu-file from the latest zip folder from the plane folder (f4light_AirbotV2_bl.dfu : 940 KB - 10 KB more) in MP baro/altitude works well without issues (shows correct chanings in altitude) .

borard

Omnibus F4 V3

Platform

[ ] Copter (issue) [ ] Plane (works)

Thanks for any solution

[night-ghost]

what shows absolute pressure (Status tab)?

[diadem56]

the board loaded with the copter firmware: press_abs: 927.091 (stays static also when I rise the board)

the board loaded with the plane firmware: perss_abs: 231.81 (moves when I rise the bord)

[night-ghost]

I don't have such board but there is no any problems on Matek F405-CTR with the same baro