nicx

Simulate Madoka room thermostat with P1P2Serial

6

Is it possible to simulate an external Madoka room thermostat with the P1P2serial module? My idea: activate the external room thermostat function in my Altherma, then setting the current room...

mqtt reconnect timeout

11

hey, i am using the module now for a few days. in general it works good :) my problem: every night, i stop all my docker containers (including mqtt server...

[BUG] Syncing a lot of files leads to an Error 503 with ServerErrorCode "THROTTLED"

1

I am syncing a lot of files and photos. After a while I get the following error: ``` 2024-03-18 15:42:44,280 :: DEBUG :: icloudpy.services.drive.http :: base.py :: 142 :: {'document_id':...

Client error: RecvError(()) when connecting to modus-proxy

11

I try to run modbus-proxy via Docker on my Unraid server (IP address of the server is 192.168.0.1). I am using a Huawei SUN2000 10KTL inverter (IP address is 192.168.1.4)....

Sensors for Power Consumption and Realtime COP not working

9

Maybe it's the same problem: My sensors for Power consumption (HC_Power) and Realtime COP (HC_COP) are always 0. Power Production Sensors are working, COP-Lifetime seems also correct. What could I...

FEATURE REQUEST: Add Service for printing diagnostic page

9

Would be great if you could add a service for printing the diagnostic page. I want to automatically print the diagnostic page once a week to prevent the ink from...

Accuracy of sensor sensor.hc_lwt_lwt_setpoint is only 1.0 steps

2

As already recognized [here](https://github.com/Arnold-n/P1P2MQTT/issues/177) there seems a bug in the accuracy of the sensor sensor.hc_lwt_lwt_setpoint. It only shows values in 1.0 steps, but not in 0.1 steps (as all other...