lets-split-guide
lets-split-guide copied to clipboard
nicinabox
This guide covers building a Let's Split v2
A vendor named Beekeep is selling these Let's Split kits with a "legacy Pro Micro". These can be made to work, but require a 1-line modification to the firmware. The...
- Update URL for beekeeb.com, link directly to shop. - Removed smashing acrylics.co.uk site is a holding domain now. - Removed spacecat.design, just links to an empty eBay account -...
In the assembly instructions, ordering a case mentions some dimensions: > Select Choose a size > P1 - 7.126 inches long x 7.126 inches wide However, when looking at the...
I have two splits using teensy's and TRRS jacks correctly sending key strokes across the wire. However, I haven't been able to get an RGB strip to light when connected...
TODO - [ ] Sort out QMK reverted reversed keymap - [ ] Sort out QMK lingering rev2fliphalf bits - [ ] Add eeprom-left/right commands to QMK and document
When I read "2 switches", I grabbed 2 switches and mounted one on each side. It was not clear to me that I needed to mount 4 switches, 2 per...
While following the build I didn't pay attention to the orientation of the board and set the jumpers on the wrong side of the PCB for one half. I noticed...
Hi,Is there any other way for your right keyboard to write without USB besides using SWD pins
