NiceDevil
NiceDevil
### Bug Description I start a print and cancel it after the printer is printing my objects. Then the printer goes to it "print canceled position" and I start the...
After installing your firmware and adjusting the sensorless homing sensitivity I figured out that X needs always a 2nd home to home properly. On the first home it only goes...
**Is your feature request related to a problem? Please describe.** Pets may die during the time where nobody is looking for them (some people have to work :D) On other...
NB: Before submitting an issue, check if there is one already open that suits the problem you are having! Device Model/Firmware: DGA4132 - 2.3.5 GUI Version: 9.6.97 I can't go...
I used your script to get the f....ng Mailpiler Install part done. Unfortunately it isn't listening on any webgui port after the installation. Is this meant to be the right...
Hey guys, I'm trying to get OIDC working with our FortiAuthenticator. Unfortunately I can't get anything up and running. My planka systemd service stops with the following message: ```python Apr...
### Question Heya guys, I have my installation on an AlmaLinux 9.3 and I was running NPM 16.x before. I used the deployment guide from here https://dashy.to/docs/deployment#build-from-source. Now the eror...
As the title says, that is what my roborock S7 Max V Ultra cam tells me in your addon. I tested it with and without a pin, nothing seems to...
Hey biddster, first I want to thank you for all your work! I'm on a testrun with your nodes right now and I'm wondering if you would be able to...
@biddster Thank you for your enhancement with the Sender ID detection. I've tried it on 2 seperate instances but we only get the ID / IP Adress of the same...