AqaraGateway
AqaraGateway copied to clipboard
Aqara smart knob switch H1 incompatible problem
Hi ! I have bought a Aqara smart knob switch H1(ZNXNKG01LM) , the channels work well but i can't get the state of switch .After looking into the mqtt log ,I found out the 'lumi res name' is not same as the param set in util.py:706
# ['0.24.85', 'rotate_angle', 'rotate_angle', None],
# ['0.25.85', 'action_duration', 'action_time', None],
# ['0.29.85', 'rotate_angle', 'rotate_angle', None], # while hold
# ['0.30.85', 'action_duration', 'rotate_angle', None], # while hold
['13.2.85', 'rotate_angle', 'rotate_angle', None],
['13.6.85', 'action_duration', 'action_time', None],
['13.9.85', 'rotate_angle', 'rotate_angle', None], # while hold
['13.13.85', 'action_duration', 'rotate_angle', None], # while hold
here is my log ,i have taged the actions knoblog.log
and i don't know how to get the rotate angle . please tell me if there is a sloution.
according to aqara equipment-resourece model: lumi.switch.rkna01
res_name (CN) | alias | ResourceId |
---|---|---|
单次累计旋转角度 | rotate_cumulate_angle | 13.2.85 |
当前旋转角度 | rotate_current_angle | 13.3.85 |
当前旋转角度的百分比 | rotate_current_angle_percent | 13.5.85 |
累计旋转角度的百分比 | rotate_cumulate_angle_percent | 13.6.85 |
按着单次累计旋转角度 | press_rotate_cumulate_angle | 13.9.85 |
当前按着旋转角度 | press_rotate_current_angle | 13.10.85 |
单次按着累计旋转时间 | press_rotate_cumulate_time | 13.11.85 |
当前按着旋转角度的百分比 | press_rotate_curr_angle_per | 13.12.85 |