Does not work with MiFare Classic 1k emulation card with SAK=28, both mfoc and mfoc-hardnested

[priv]

Need some help debugging

I'm sure it's valid Mifare 1k Emulation card, and I'm able to use libnfc_crypto1_crack to retrieve some keys. But since mfoc does not work, miLazyCracker will not work either, it's a pain.

First, mfoc/mfoc-hardnested does not check SAK=28 at all, so it will show "Cannot determine card type from SAK"

After add 0x28 to the switch case, it still failed to execute nfc_initiator_select_passive_target() in get_rats_is_2k(), so it will show "Error: tag disappeared"

I know it's 1k card, so I just commented out the full 2k check section.

However, the new road blocker is nfc_initiator_mifare_cmd: Invalid argument(s).

Does any one know how to get pass this problem?

execution result attached.

Found Mifare Classic 1k tag
ISO/IEC 14443A (106 kbps) target:
    ATQA (SENS_RES): 00  04  
* UID size: single
* bit frame anticollision supported
       UID (NFCID1): xx xx xx xx 
      SAK (SEL_RES): 28  
* Compliant with ISO/IEC 14443-4
* Not compliant with ISO/IEC 18092
                ATS: 78  80  72  02  80  31  80  66  b1  84  0c  01  6e  01  83  00  90  00  
* Max Frame Size accepted by PICC: 256 bytes
* Bit Rate Capability:
  * Same bitrate in both directions mandatory
* Frame Waiting Time: 38.66 ms
* Start-up Frame Guard Time: 1.208 ms
* Node Address not supported
* Card IDentifier supported
* Historical bytes Tk: 80  31  80  66  b1  84  0c  01  6e  01  83  00  90  00  
  * Tk after 0x80 consist of optional consecutive COMPACT-TLV data objects;
    the last data object may carry a status indicator of one, two or three bytes.
    See ISO/IEC 7816-4 8.1.1.3 for more info

Fingerprinting based on MIFARE type Identification Procedure:
* SmartMX with MIFARE 1K emulation
Other possible matches based on ATQA & SAK values:
* JCOP31 v2.3.1

Try to authenticate to all sectors with default keys...
Symbols: '.' no key found, '/' A key found, '\' B key found, 'x' both keys found
nfc_initiator_mifare_cmd: Invalid argument(s)
[Key: ffffffffffff] -> [alvin@alvin-WS-E500-G5:~/pool/mfoc-hardnested$ 

[sumanblack666]

use this https://github.com/nfc-tools/mfoc-hardnested

[priv]

Hi the problem is same, you can see my log I already compiled latest mfoc-hardnested, both mfoc/mfoc-hardnested share same checking/reading code. It fails on first try with key ffffffffffff