Diff Nt = 1 , The attack didn't progress...

[Unknown6555]

Hi all !

I install lib 1.5.1 and mfcuk r65 with this link (https://gist.github.com/ceres-c/b84935799f5d65a4e41328d3ceaa075c)

my pcscd is ok , the communication was good (see screen)

but the differents Nt stay on 1 , and after 12hours its same... I dont understand why !

Anyone have this problem ? Thanks !

[ciorceri]

I have the same with a single tag. Even if I know the keyA/B the dark-side attack doesn't work.

[MayMih]

Same Issue with PN532 via libnfc 1.7.1 and mfcuk 0.3.8+git20180720-1 even on test card which I bought with reader?!

[jmvictorio]

same problem

[MayMih]

Any ideas, what it could be? May be thus us this a new generation of cards, cause we have this problem on older Lib versions too?

ср, 23 окт. 2019 г., 12:39 Jesus Victorio [email protected]:

same problem

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/nfc-tools/mfcuk/issues/64?email_source=notifications&email_token=AB5UXU6PGXUISE3MHFG6HH3QQALVNA5CNFSM4F6IBMD2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOECAYP2Y#issuecomment-545359851, or unsubscribe https://github.com/notifications/unsubscribe-auth/AB5UXU2ZNQAP3XZPNJE2UX3QQALVNANCNFSM4F6IBMDQ .

[targodan]

I have the same problem. I also tried older lib versions without success.

However! I know it worked with the exact same hardware (and even same attacked card) a few years ago. My guess then would be either dependencies of libnfc (like libusb e.g.) or changes in the linux kernel are to blame?