nfc-tools
error libnfc.driver.acr122_usb Wrong reply
Hello!
I'm stucked at this point with the libnfc 1.8.0 and do not find information about this error:
nfc-list -v 130 ⨯ nfc-list uses libnfc 1.8.0 NFC device: ACS / ACR122U PICC Interface opened 1 ISO14443A passive target(s) found: ISO/IEC 14443A (106 kbps) target: ATQA (SENS_RES): 00 04
- UID size: single
- bit frame anticollision supported UID (NFCID1): 67 32 64 c3
SAK (SEL_RES): 08- Not compliant with ISO/IEC 14443-4
- Not compliant with ISO/IEC 18092
Fingerprinting based on MIFARE type Identification Procedure:
- MIFARE Classic 1K
- MIFARE Plus (4 Byte UID or 4 Byte RID) 2K, Security level 1
- SmartMX with MIFARE 1K emulation Other possible matches based on ATQA & SAK values:
error libnfc.driver.acr122_usb Wrong reply 0 Felica (212 kbps) passive target(s) found.
error libnfc.driver.acr122_usb Wrong reply 0 Felica (424 kbps) passive target(s) found.
error libnfc.driver.acr122_usb Wrong reply 0 ISO14443B passive target(s) found.
0 ISO14443B' passive target(s) found.
0 ISO14443B-2 ST SRx passive target(s) found.
0 ISO14443B-2 ASK CTx passive target(s) found.
0 ISO14443B iClass passive target(s) found.
error libnfc.driver.acr122_usb Wrong reply 0 ISO14443A-3 Jewel passive target(s) found.
0 ISO14443A-2 NFC Barcode passive target(s) found.
error libnfc.driver.acr122_usb Wrong reply
cat /etc/os-release PRETTY_NAME="Kali GNU/Linux Rolling" NAME="Kali GNU/Linux" ID=kali VERSION="2021.2" VERSION_ID="2021.2" VERSION_CODENAME="kali-rolling" ID_LIKE=debian ANSI_COLOR="1;31" HOME_URL="https://www.kali.org/" SUPPORT_URL="https://forums.kali.org/" BUG_REPORT_URL="https://bugs.kali.org/"
uname -r 5.10.0-kali7-amd64
lsusb -v
Bus 002 Device 005: ID 072f:2200 Advanced Card Systems, Ltd ACR122U Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x072f Advanced Card Systems, Ltd idProduct 0x2200 ACR122U bcdDevice 2.14 iManufacturer 1 ACS iProduct 2 ACR122U PICC Interface iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x005d bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 200mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 11 Chip/SmartCard bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 ChipCard Interface Descriptor: bLength 54 bDescriptorType 33 bcdCCID 1.00 nMaxSlotIndex 0 bVoltageSupport 7 5.0V 3.0V 1.8V dwProtocols 2 T=1 dwDefaultClock 4000 dwMaxiumumClock 4000 bNumClockSupported 0 dwDataRate 10752 bps dwMaxDataRate 250000 bps bNumDataRatesSupp. 0 dwMaxIFSD 256 dwSyncProtocols 00000000 dwMechanical 00000000 dwFeatures 00020040 Auto parameter negotiation made by CCID Short APDU level exchange dwMaxCCIDMsgLen 271 bClassGetResponse 00 bClassEnvelope 00 wlcdLayout none bPINSupport 0 bMaxCCIDBusySlots 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 50 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 can't get debug descriptor: Resource temporarily unavailable Device Status: 0x0000 (Bus Powered)
Possibly related to #666.
lsusb
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x072f Advanced Card Systems, Ltd
idProduct 0x2200 ACR122U
bcdDevice 2.14
iManufacturer 1 ACS
iProduct 2 ACR122U PICC Interface
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x005d
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 200mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 11 Chip/SmartCard
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
ChipCard Interface Descriptor:
bLength 54
bDescriptorType 33
bcdCCID 1.00
nMaxSlotIndex 0
bVoltageSupport 7 5.0V 3.0V 1.8V
dwProtocols 2 T=1
dwDefaultClock 4000
dwMaxiumumClock 4000
bNumClockSupported 0
dwDataRate 10752 bps
dwMaxDataRate 250000 bps
bNumDataRatesSupp. 0
dwMaxIFSD 256
dwSyncProtocols 00000000
dwMechanical 00000000
dwFeatures 00020040
Auto parameter negotiation made by CCID
Short APDU level exchange
dwMaxCCIDMsgLen 271
bClassGetResponse 00
bClassEnvelope 00
wlcdLayout none
bPINSupport 0
bMaxCCIDBusySlots 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 50
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
With #678 applied on top of 42de50f2b7bd4c43e3b92f5c9d6a996fd5300e4f:
LIBNFC_LOG_LEVEL=3
error libnfc.driver.acr122_usb PN532 init failed, trying again...
error libnfc.driver.acr122_usb Unexpected Status Word (SW1: 3b SW2: 00)
error libnfc.driver.acr122_usb PN532 init failed, trying again...
NFC device: ACS / ACR122U PICC Interface opened
error libnfc.driver.acr122_usb Command Code verification failed
error libnfc.driver.acr122_usb Wrong reply
error libnfc.driver.acr122_usb Wrong reply
error libnfc.driver.acr122_usb Wrong reply
error libnfc.driver.acr122_usb Command Code verification failed
error libnfc.chip.pn53x Buffer size is too short: 1 available(s), 2 needed
error libnfc.driver.acr122_usb Command Code verification failed
error libnfc.driver.acr122_usb Command Code verification failed
error libnfc.driver.acr122_usb Wrong reply
error libnfc.driver.acr122_usb Wrong reply
info libnfc.config Unable to open file: /etc/nfc/libnfc.conf
debug libnfc.config Unable to open directory: /etc/nfc/devices.d
debug libnfc.general log_level is set to 3
debug libnfc.general allow_autoscan is set to true
debug libnfc.general allow_intrusive_scan is set to false
debug libnfc.general 0 device(s) defined by user
debug libnfc.driver.acr122_usb device found: Bus 003 Device 007 Name ACS ACR122
debug libnfc.general 1 device(s) found using acr122_usb driver
debug libnfc.driver.acr122_usb 3 element(s) have been decoded from "acr122_usb:003:007"
debug libnfc.driver.acr122_usb TX: 62 00 00 00 00 00 00 01 00 00
debug libnfc.driver.acr122_usb RX: 80 08 00 00 00 00 00 02 81 00 d5 03 32 01 06 07 90 00
debug libnfc.driver.acr122_usb ACR122 PICC Operating Parameters
debug libnfc.driver.acr122_usb TX: 6f 05 00 00 00 00 00 00 00 00 ff 00 51 00 00
debug libnfc.driver.acr122_usb RX: 80 02 00 00 00 00 00 00 81 00 3b 00
debug libnfc.chip.pn53x GetFirmwareVersion
debug libnfc.driver.acr122_usb TX: 6f 07 00 00 00 00 00 00 00 00 ff 00 00 00 02 d4 02
debug libnfc.driver.acr122_usb RX: 80 08 00 00 00 00 00 02 81 00 d5 03 32 01 06 07 90 00
debug libnfc.chip.pn53x SetParameters
debug libnfc.driver.acr122_usb TX: 6f 08 00 00 00 00 00 00 00 00 ff 00 00 00 03 d4 12 14
debug libnfc.driver.acr122_usb RX: 80 04 00 00 00 00 00 02 81 00 d5 13 90 00
debug libnfc.general "ACS / ACR122U PICC Interface" (acr122_usb:003:007) has been claimed.
debug libnfc.general set_property_bool NP_ACTIVATE_FIELD False
debug libnfc.chip.pn53x ReadRegister
debug libnfc.driver.acr122_usb TX: 6f 11 00 00 00 00 00 00 00 00 ff 00 00 00 0c d4 06 63 02 63 03 63 0d 63 38 63 3d
debug libnfc.driver.acr122_usb RX: 80 09 00 00 00 00 00 02 81 00 d5 07 80 80 00 00 00 90 00
debug libnfc.chip.pn53x RFConfiguration
debug libnfc.driver.acr122_usb TX: 6f 09 00 00 00 00 00 00 00 00 ff 00 00 00 04 d4 32 01 00
debug libnfc.driver.acr122_usb RX: 80 04 00 00 00 00 00 02 81 00 d5 33 90 00
debug libnfc.general set_property_bool NP_ACTIVATE_FIELD True
debug libnfc.chip.pn53x RFConfiguration
debug libnfc.driver.acr122_usb TX: 6f 09 00 00 00 00 00 00 00 00 ff 00 00 00 04 d4 32 01 01
debug libnfc.driver.acr122_usb RX: 80 04 00 00 00 00 00 02 81 00 d5 33 90 00
debug libnfc.general set_property_bool NP_INFINITE_SELECT True
debug libnfc.chip.pn53x RFConfiguration
debug libnfc.driver.acr122_usb TX: 6f 0b 00 00 00 00 00 00 00 00 ff 00 00 00 06 d4 32 05 ff ff ff
debug libnfc.driver.acr122_usb RX: 80 04 00 00 00 00 00 02 81 00 d5 33 90 00
debug libnfc.general set_property_bool NP_AUTO_ISO14443_4 True
debug libnfc.general set_property_bool NP_FORCE_ISO14443_A True
debug libnfc.general set_property_bool NP_FORCE_SPEED_106 True
debug libnfc.general set_property_bool NP_ACCEPT_INVALID_FRAMES False
debug libnfc.general set_property_bool NP_ACCEPT_MULTIPLE_FRAMES False
NFC reader: ACS / ACR122U PICC Interface opened
NFC device will poll during 36000 ms (20 pollings of 300 ms for 6 modulations)
debug libnfc.chip.pn53x ReadRegister
debug libnfc.driver.acr122_usb TX: 6f 13 00 00 00 00 00 00 00 00 ff 00 00 00 0e d4 06 63 02 63 03 63 05 63 38 63 3c 63 3d
debug libnfc.driver.acr122_usb RX: 80 0a 00 00 00 00 00 02 81 00 d5 07 80 80 43 00 00 00 90 00
debug libnfc.chip.pn53x PN53X_REG_CIU_Control (Contains miscellaneous control bits)
debug libnfc.chip.pn53x WriteRegister
debug libnfc.driver.acr122_usb TX: 6f 0a 00 00 00 00 00 00 00 00 ff 00 00 00 05 d4 08 63 3c 10
debug libnfc.driver.acr122_usb RX: 80 04 00 00 00 00 00 02 81 00 d5 09 90 00
debug libnfc.chip.pn53x InAutoPoll
debug libnfc.chip.pn53x No timeout
debug libnfc.driver.acr122_usb TX: 6f 10 00 00 00 00 00 00 00 00 ff 00 00 00 0b d4 60 14 02 20 10 03 11 12 04 03
debug libnfc.driver.acr122_usb RX: 80 00 00 00 00 00 00 02 81 00
error libnfc.driver.acr122_usb Wrong reply
nfc_initiator_poll_target: Input / Output Error
debug libnfc.driver.acr122_usb ACR122 Abort
debug libnfc.driver.acr122_usb TX: 6f 07 00 00 00 00 00 00 00 00 ff 00 00 00 02 d4 02
debug libnfc.driver.acr122_usb RX: 80 08 00 00 00 00 00 02 81 00 d5 03 32 01 06 07 90 00
debug libnfc.chip.pn53x InRelease
debug libnfc.driver.acr122_usb TX: 6f 08 00 00 00 00 00 00 00 00 ff 00 00 00 03 d4 52 00
debug libnfc.driver.acr122_usb RX: 80 00 00 00 00 00 00 02 81 00
error libnfc.driver.acr122_usb Wrong reply
Device
Please note that the device appears to be working just fine with pcscd and https://github.com/Flowtter/py-acr122u:
However, shutting down the daemon doesn't seem to be "resetting" the device as it just goes into timeout upon relaunching, with the green LED stuck.
I acquired another seemingly identical device, this time with a mini CD included. Here's the SDK that is provided: ACR122U_SDK.zip
The problem is that this other device works just fine with #678 applied. I wonder whether we're dealing with a defective and/or fake chip batch...
Alternatively, it could have different factory settings. On the device that is working the LED never turns on, on the other one it's red and turns to green when it detects an NFC tag.
Same problem here. I've tried using my ACR122U on 4 diffirents OS, 2 different machines:
- Kali 2023.4
- Debian 12
- Ubuntu Server 22.04.4 LTS
- Kubuntu 22.04.4 LTS
All with the same problem, "error libnfc.driver.acr122_usb Wrong reply" Hopefully the problem comes from the device and getting another one will fix my issue.
Update: I've bought a new one and I don't have the error anymore. Either the other guy sold me a fake or it was damaged.
Could you send here a picture of the device's back, please?
Same back as the old one I had
Interesting... in that case there may be no easy way to determine whether a specific reader is going to work.