nrc7292_sw_pkg
nrc7292_sw_pkg copied to clipboard
newracom
NRC7292 Software Package for Host mode (Linux OS)
When ieee80211_register_hw fails for some reason (and returns `EINVAL`/`-22`), the error handling and cleanup is unsafe. For example: ``` ------------[ cut here ]------------ WARNING: CPU: 3 PID: 1105 at net/mac80211/main.c:972...
Attempting to build the kernel module fails on a fresh install of Raspberry Pi OS (bookworm) running the 6.6.20 kernel on a Pi 4: ``` pi@piradio5:~/nrc7292_sw_pkg/package/src/nrc $ uname -a Linux...
I built the ft232 module and enabled `ft232h_usb_spi` in `start.py`, but dmesg doesn't say anything besides `Succeed to register spi driver(nrc80211).` . I suspected a mismatch between the FT232H wiring...
Just trying to unload the module when the underlying SPI device has disappeared will cause a kernel oops. ``` Unable to handle kernel paging request at virtual address 003a312d312f315c Mem...
I'm running on latest version of the module and it seems that the module is not very robust when the communication bus gets interfered with. This makes it really difficult...
 Encountered strange error while testing newest v1.5.0 firmware, what does it mean that target watchdog expired and hardware was restarted?
Hello❤ I have a problem when I want to broadcast the fake network, this error appears. What is the solution? hostapd-wpe /etc/hostapd-wpe/hostapd-wpe.conf These are the problems nl80221: cloud not configure...
Tried to use new v1.5 driver, but received kernel panic during loading new driver, removed `ENABLE_DYNAMIC_PS` that helped to load the driver properly when using v1.3.x, but no success. Any...
I have two Raspberry Pi 4 Model B (STA and AP) with Raspbian OS (32 bit) installed, connected to the Wi-Fi HaLow AHPI7292SA boards. I followed the guide and, after...
I am currently testing with "AHPI7292S" from Alfa Networks. I have used their prebuilt image and it works as long as there is no apt update/upgrade, only with this particular...
