Cyberpower UT850EG is working although it is not listed in the compatibility list

[prabathbr]

Hi,

I just wanted to let you know that Cyberpower UT850EG is working, although it is not listed in the compatibility list. I am using WinUSB driver installed with zadig on Windows 10 Pro, and NUT binaries are obtained from NUT-for-Windows-x86_64-RELEASE-2.8.4.7z

UPS information : https://www.cyberpower.com/au/en/product/sku/ut850eg

UPS.conf, running with usbhid-ups -a cyberpower

[cyberpower]
    driver = usbhid-ups
    port = auto
    vendorid = 0764
    productid = 0501

Here is the upsc output.

c:\ups\bin>upsc [email protected]
battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 20
battery.mfr.date: CPS
battery.runtime: 1527
battery.runtime.low: 300
battery.status: 100%
battery.type: PbAcid
battery.voltage: 13.7
battery.voltage.nominal: 12
device.mfr: CPS
device.model: UT850EG
device.serial:
device.type: ups
driver.debug: 0
driver.flag.allow_killpower: 0
driver.name: usbhid-ups
driver.parameter.interrupt_pipe_no_events_tolerance: -1
driver.parameter.pollfreq: 12
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.productid: 0501
driver.parameter.synchronous: auto
driver.parameter.vendorid: 0764
driver.state: quiet
driver.version: 2.8.4
driver.version.data: CyberPower HID 0.84
driver.version.internal: 0.67
driver.version.usb: libusb-1.0.27 (API: 0x0100010A)
input.frequency: 50.0
input.transfer.high: 295
input.transfer.low: 167
input.voltage: 244.0
input.voltage.nominal: 230
output.voltage: 243.0
unmapped.ups.powersummary.capacitygranularity1: 5
unmapped.ups.powersummary.capacitygranularity2: 10
unmapped.ups.powersummary.capacitymode: 2
unmapped.ups.powersummary.designcapacity: 100
unmapped.ups.powersummary.rechargeable: 1
ups.beeper.status: enabled
ups.delay.shutdown: 60
ups.delay.start: 120
ups.firmware: BF01701F9
ups.load: 19
ups.mfr: CPS
ups.model: UT850EG
ups.power.nominal: 0
ups.productid: 0501
ups.realpower.nominal: 425
ups.serial:
ups.status: OL
ups.test.result: No test initiated
ups.timer.shutdown: -60
ups.timer.start: -60
ups.vendorid: 0764

This is how it is displayed on HomeAssistant with NUT addon.

[jimklimov]

Great to hear that it (both the Windows build, and the driver in particular) works for you, thanks for reporting!