networkupstools
[HCL] Prolink PRO1201SFCU
root@TRUENAS-SCALE[/]# upsc -l Init SSL without certificate database ups root@TRUENAS-SCALE[/]# date Mon Oct 30 11:24:19 +08 2023 root@TRUENAS-SCALE[/]# upsc ups@localhost Init SSL without certificate database battery.charge: 100 battery.voltage: 27.10 battery.voltage.high: 26.00 battery.voltage.low: 20.80 battery.voltage.nominal: 24.0 device.mfr: Prolink device.model: PRO1201SFC device.type: ups driver.name: blazer_usb driver.parameter.pollinterval: 2 driver.parameter.port: /dev/uhid driver.parameter.synchronous: no driver.version: 2.7.4 driver.version.internal: 0.12 input.current.nominal: 4.0 input.frequency: 50.0 input.frequency.nominal: 50 input.voltage: 238.3 input.voltage.fault: 238.3 input.voltage.nominal: 230 output.voltage: 238.3 ups.beeper.status: enabled ups.delay.shutdown: 30 ups.delay.start: 180 ups.firmware: ups.load: 0 ups.mfr: Prolink ups.model: PRO1201SFC ups.productid: 5161 ups.status: OL ups.type: offline / line interactive ups.vendorid: 0665
Broadcast message from nut@TRUENAS-SCALE (somewhere) (Mon Oct 30 11:25:41 2023)
Executing automatic power-fail shutdown
2023 Oct 30 11:25:41 TRUENAS-SCALE Executing automatic power-fail shutdown
Product Page https://prolink2u.com/products/sfcu-series?variant=40573922902089
Well, according to the data dump above, at least one model by that name did work. If the internals did not significantly change during this couple of years, there are reasons to hope yours works too :)
Well, according to the data dump above, at least one model by that name did work. If the internals did not significantly change during this couple of years, there are reasons to hope yours works too :)
I can just use sudo upsc prolink to get the info. Currently unable to automate shutdown process. I created an issue here #3230
Tried to add as much information as possible. I already had issues with SELinux but I think I was able to fix those but right now I don't know what to do.