nedrysoft
Win 7 crashes
Just downloaded 2021.04.30-develop, and I've got some crashes. First one happens if if ICMP Socket is chosen for the engine, as soon as I click start it creates the results window and then dies
Faulting application name: Pingnoo.exe, version: 0.0.0.0, time stamp: 0x608bebce Faulting module name: ICMPSocket.dll, version: 0.0.0.0, time stamp: 0x608bea56 Exception code: 0xc0000005 Fault offset: 0x0000000000001737 Faulting process id: 0x17f4 Faulting application start time: 0x01d78cd0be36af20 Faulting application path: C:\Program Files\nedrysoft.com\Pingnoo\Pingnoo.exe Faulting module path: C:\Program Files\nedrysoft.com\Pingnoo\ICMPSocket.dll Report Id: 07cd0fd0-f8c4-11eb-8f2a-d0c5d3848394
Switching the engine to ICMPAPI after hitting start it churns for a minute and then seems to begin working normally, except that it doesn't seem to detect the correct route ( compared to ping plotter on the same machine, and a different pingnoo instance running on an ubuntu box on the same network) it turns a 13 hop route into a 63 hop trace where all hops are just full packet loss after hop 12. Left running for a few minutes the window will silently close, with no error or message.
I think I’ve fixed these issues, but I haven’t built windows binaries because I was in the middle of some other changes, unfortunately I’ve been quite unwell for the past few months, so I haven’t got back to continuing where I left off.
I will trigger a windows build and try to push a pre-release windows build tonight to see if that fixes your issues, I’ll let you know once I’ve done it here.
Thanks for the report, hopefully I’ve fixed what you have described, I reworked the code for route discovery and it now reports the route as it’s being discovered rather than just appearing to freeze.
no worries, it works in linux which is where I really need it. Just wanted to be sure there was a report logged for it.
I’ll try to push Linux binaries as well then, the new version is worth using purely for the responsive UI when detecting the route! I think I fixed the 64 hop thing as well.
@Extent421 I have uploaded Windows 32-bit, 64-bit and portable versions as a pre-release, please try this version and let me know if it works or not for you.
https://github.com/nedrysoft/pingnoo/releases/tag/2021.06.23-develop
I can see it trying to work, but route detection seems to be about the same. It displays the first 3 or 4 hops, and then freezes just like before, it popped back once at 53 hops and then froze again before capping out at 63 hops, and still not getting the right route.
But it's been running for about an hour now without the window disappearing though, so that's fixed.
ICMP Socket crash still happens with the same code and offset,
If you have windows firewall enabled, can you try temporarily disabling it and then try ICMP socket again.
ICMPAPI seems to pass through the firewall without any special treatment, ICMP socket under windows doesn’t though. I will have to set up a windows 7 VM to test. On 9 Aug 2021, 23:56 +0100, Extent @.***>, wrote:
I can see it trying to work, but route detection seems to be about the same. It displays the first 3 or 4 hops, and then freezes just like before, it popped back once at 53 hops and then froze again before capping out at 63 hops, and still not getting the right route. But it's been running for about an hour now without the window disappearing though, so that's fixed. ICMP Socket crash still happens with the same code and offset, — You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.
turning off the firewall gives the same crash. I don't remember seeing the allow access popup for it, so it must be dying before that point.
I can see it trying to work, but route detection seems to be about the same.
Same here.
ICMP Socket crash still happens
Same for me, initially the program was working fine for several runs, but now it crashes always after pressing Start.
Program good, but useless until the bugs fixed.
