homeassistant-midea-air-appliances-lan
homeassistant-midea-air-appliances-lan copied to clipboard
nbogojevic
Screen toggle switch does not work for AC
Version of the custom_component
v0.8.12
Configuration
Configured via UI
Describe the bug
The switch for controlling the screen (I'm assuming that is what this does) does not appear to work. After I went in and enabled it, it does not fully initialize and actually become usable.
The "LED" button on my remote does correctly toggle the LED display on the front of the AC.
I have the same problem with mine ACs! Please Fix it! I want make an automation for after midnight turn off the led panel because I have problem with any tiny light when I sleep...
This issue is stale because it has been open 60 days with no activity. Remove stale label or comment or this will be closed in 7 days.
![github-actions[bot] avatar](https://avatars.githubusercontent.com/in/15368?v=4 "Published by a pub.dev verified publisher"){kind=small}
Apparently, this only works if you have an IR blaster wired in on the same device. IMO, this should be disabled by default. But not sure if there are other devices where it works out of the box without the IR blaster.
Apparently, this only works if you have an IR blaster wired in on the same device. IMO, this should be disabled by default. But not sure if there are other devices where it works out of the box without the IR blaster.
I have several AG2LITE-09NXD0-I and this didn't work before but out of nowhere I decided to retry and worked. Not sure if was a component or AC firmware update
Apparently, this only works if you have an IR blaster wired in on the same device. IMO, this should be disabled by default. But not sure if there are other devices where it works out of the box without the IR blaster.
I have several AG2LITE-09NXD0-I and this didn't work before but out of nowhere I decided to retry and worked. Not sure if was a component or AC firmware update
Good to know.
Adding the IR emitter wasn't hard, just wish it was documented somewhere so I didn't have to try stuff before figuring it out. Now if only I could figure out how to permanently disable the beeper.....
Apparently, this only works if you have an IR blaster wired in on the same device. IMO, this should be disabled by default. But not sure if there are other devices where it works out of the box without the IR blaster.
I have several AG2LITE-09NXD0-I and this didn't work before but out of nowhere I decided to retry and worked. Not sure if was a component or AC firmware update
Good to know.
Adding the IR emitter wasn't hard, just wish it was documented somewhere so I didn't have to try stuff before figuring it out. Now if only I could figure out how to permanently disable the beeper.....
There's a Prompt Tone switcher that always worked. Have you tried it?
There's a Prompt Tone switcher that always worked. Have you tried it?
No, what's this?
This issue is stale because it has been open 60 days with no activity. Remove stale label or comment or this will be closed in 7 days.
Nothing can turn off the screen light. Please add it, it same to use the "remote" just for that! We have 2024, we have brand new ACs and we play with "remotes" from 90s!
@poldim the beeper switch it works, but if you don't want every time you restart HA open again, make an automation with "HA Start" as trigger and put your ACs to turn off beeper from start so it will be always on mute! ;)
Coming back to this... sorry for the silence.
Check the pic below. Both tone and display are working with my units.
Nothing can turn off the screen light. Please add it, it same to use the "remote" just for that! We have 2024, we have brand new ACs and we play with "remotes" from 90s!
From other forums, it appears that LED control is not exposed through API. You need to add an IR blaster and then it works.