Mieczyslaw Nalewaj
Mieczyslaw Nalewaj
~~Try it: mr52.zip~~ Check interface LAN/WAN order and LED order. Attach log.
This is strange because I swapped eth0 and eth1 in this image in the 02_network. @robimarko @Ansuel Please take a look
@vochong What about the port order? Do the LEDs indicate the correct ports?
Another problem with mr42/mr52: https://forum.openwrt.org/t/mr42-mr52-leds/198842
Please test it, Replace file target/linux/generic/pending-6.6/730-net-phy-realtek-detect-early-version-of-RTL8221B.patch with the file: [730-net-phy-realtek-detect-early-version-of-RTL8221B.patch](https://github.com/openwrt/openwrt/files/15280715/730-net-phy-realtek-detect-early-version-of-RTL8221B.patch) If anyone has an serial interface, please paste a log from the console.
Please test https://github.com/openwrt/openwrt/pull/15453
@yogo1212 I wanted data from the serial console because I assumed that my correction would probably not work, and here's a surprise, the chip detects correctly. I went back to...
The problem exists after the commit https://github.com/openwrt/openwrt/commit/ca4469045f6a4845dbf8aeabd4b04b421209f66e, in which the previous patches were removed and replaced with new ones, apparently not fully tested.
@LuisMitaHL File target/linux/generic/pending-6.6/730-net-phy-realtek-detect-early-version-of-RTL8221B.patch to test: [730-net-phy-realtek-detect-early-version-of-RTL8221B.patch](https://github.com/user-attachments/files/16656362/730-net-phy-realtek-detect-early-version-of-RTL8221B.patch)
> Leaving open as I don't know if the next release is slated for 6.1 or 6.6. 6.6