Nikolai Ryzhkov
Nikolai Ryzhkov
@windsifter > Did you ever get it working? Yes. It's actually easy. Just pull down CLK enable pin to ground (I suppose you can use conductive ink) > I was...
@wicadmin there is no way to modify this area of firmware from software, the only one way is to flash directly with programmer. And no general way to modify it...
@wicadmin the slot is too tight… so usually impossible
Oops. You can’t masked off this pin, it must be pull down to ground.
@wicadmin I'm sure that this misplacement should not be an issue (95%, of course stupidness of engineer is possible). However, It looks like SATA card. Missing pins are 2 data...
Hey. I've started to improve my Gree AC. My remote is YAC1FB9. Although I can control AC by WiFi, I can't send iFeel temp. Do you have any advice to...
@carltongibson oops, did it long time ago but haven't mentioned it here #497
logs. It's a test build so nothing sensitive. [logs (1).tar.gz](https://github.com/user-attachments/files/16822803/logs.1.tar.gz)
To be honest, I expected some information here:
Thank you. Can you clarify/correct me if I'm not correct? * https://github.com/007revad/Video_Station_for_DSM_722 -- Install Video Station on DSM 7.2.2 * However, it removes AME v4 and replaces by 3.1.0-3005 *...