Niccolò Izzo

Nice @frankenstein91. I Will happily test what you'll come up with! I noticed that DevTerm thermal printer was integrated in CUPS too as you can see from [this hackaday article](https://hackaday.com/2022/03/02/review-devterm-linux-handheld-has-retro-future-vibe/)...

Working on - Intel Core i5 2520M - Sandy Bridge - Dell Latitude e6220 - OEM BIOS - ffe60d8 MEI is no more present in lspci output. However, the ethernet...

Hello, I'm adding some details to help any developer who will tackle this issue. The main difference between the stock firmware and OpenGD77 is the protocol used to transfer the...

Hi guruofquality, sorry for the late reply, I should have performed the tests you asked. This is the patch I've created which prints the number of read elements: ``` diff...

I can reproduce a similar issue using MMDVMHost version 33939d8 and MMDVM version f898390 on BI7JTA Repeater Board v4 paired with a Yaesu FT-8900. The LED on the repeater boards...

After #54 things are getting a lot better. However the minimum width is still too large for low-resolution screen like the Pine64 PinePhone.  Can we further reduce paddings to...

Please tell me which version of esptool.py you are using. On my system it works fine with v2.2. Also paste the terminal output, so that I can have a look...

Hi @v0l, thank you for your interest, right now the wrapping code in this project is only working for the md380, however you could try building a firmware, using [the...

I want to remind you that at the moment we are still at an early development stage, but if you're willing to build all our testsuites, that could be useful...

Hi @v0l, we did some major changes on this project since you last tried to run our code on your radio. Now we have a solid modular structure based on...