hacs_waveshare_ups_hat
hacs_waveshare_ups_hat copied to clipboard
mykhailog
Waveshare UPS Hat integration for Home Assistant.
I have a raspberry pi0 that has installed and configured an INA29 sensor and I want to integrate it into HomeAssistant.HomeAsisstant runs from another raspberry pi4 in Portainer and I...
Using your Installation and Configuration information you give, I have 2 errors. It seems that the custom components doesn't have access to SMBus. **First one for Binary sensor** Error while...
Hi I am getting the following in my logs: DEVICE_CLASS_BATTERY was used from waveshare_ups_hat, this is a deprecated constant which will be removed in HA Core 2025.1. Use SensorDeviceClass.BATTERY instead,...
Hi, do you know if this custom integration works as it is with the new UPS HAT D here is the link: https://www.waveshare.com/wiki/UPS_HAT_(D) it seems that also this hat use...
I have installed the SSH terminal extension in HA and when I connect to the Pi, I cannot run raspi-config nor apt-get, not apt. Which step am I missing please?
- Simple moving average is applied for INA219 measurements by default with window size 5. Could be changed with `sma_samples` param - `batteries_count` parameter for 12.6V UPS Hat versions with...
Is there a way to enter the battery capacity so that I get the time left on the battery? And my Low battery sensor was not activated when it was...
Hi, Happy that I can see my UPS Hat B on RPi 4 but I can't see any of the attributes. I've followed the instructions I can see but although...
Can this project be adapted/reconfigured to use UPS HAT 52pi EP-0136 https://wiki.52pi.com/index.php/EP-0136
Hello, I use the "Home Assistant Operating System" installation. I did the integration manually and before that I turned on I2C on the RASPI. The ups is recognized and I...
