mwildbolz

I can confirm, that the setup is working in OH2.5 environment. Same setup with OH3 is not working any more!

I would suggest that you clone the ebusd-configuration repository (https://github.com/john30/ebusd-configuration) to a local directory and change the message type from "r" to "r1-r9" (according to the poll priority needed) for...

vielleicht hilft dir das weiter - https://github.com/john30/ebusd/issues/508#issuecomment-1022135737

> > > hallo john30 ich nutze den esera eBus Koppler mit USB Anschluss, eigentlich sollte der schreiben können (sagt auf jeden Fall der Support) die Einstellung mit dem Poti...

> > > Hallo mwildbolz! Danke für die Info. Das hört sich sehr ähnlich zu meinem Problem an. Hast du das Problem selbst repariert oder einen neuen bestellt? Danke m-ask...

would also be interesting for me - haven't found a solution yet. Does anybody know?

Yes, I did. I also tried with another certificate and there the error was clearly a not accepted certificate.

> @mwildbolz our email address is [[email protected]](mailto:[email protected]) Mail sent - thanks in advance!

Thanks, sounds promising. I already tried adding the SAN information into the certificate before, but maybe there was an error doing this with my openssl commands. I'll give a short...

Working now - was a problem with my commands for generating the certificates using the SAN information. Thanks a lot!