uhubctl
uhubctl copied to clipboard
mvp
uhubctl - USB hub per-port power control
The uhubctl output currently requires custom parsing in order to use it in scripts. It would be nice to have an option for JSON output so that scripts can just...
Hi, we are currently developing a Linux based embedded device on which we want to be able to power on/off the individual USB ports. Wiring up the on-board hub for...
I've been using uhubctl to toggle power to frozen/hung disks. But now, under Linux 6 (rc3) if the disk is opened (e.g. a process is reading it, or in my...
I bought the Cyberpower CP-H420P because it's in the list of confirmed to work devices. However, I plugged in a fan and a little stick heater as well as a...
It seems like uhubctl ist not working on Raspberry Pi5 Raspbian 12 bookworm ``` # lsusb Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device...
feature request: --quiet -q suppress all messages except for critical errors It's a lovely app which is working well, but boy it's chatty while doing it's work. Best, -3ric
It would be helpful if this tool could be enhanced to control power delivery for Type C host ports that support USB PD so that we can control USB 3.1,...
I managed to track down and purchased a USB3-HUB7-81X-EU which may be different variation to the USB3-HUB7-81X listed. On the device itself the model number is the same USB3-HUB7-81X but...
I tested some Rosonway hubs: A10 works very pleasant. However, the hubs A107 and ST107C use newer chips and may not be recommended for power on/off.
The CG-10PU3MGD hub can be controlled with uhubctl, with devices being disconnected from host. However the 5V rail does not switch off. There is a binary blob available from the...
