Christian Muehlhaeuser

The stopwatch bubble is indeed a bit broken and would require a continuous timer running in the background. I believe there's a ticket in the bubbles repo for it.

@EricBuijs Curious, how did the print go (should you have already finished it)? I also see the OpenSCAD warning, and that seems to be related to the connectors (it disappears...

@EricBuijs Nice one! Yeah, as mentioned in the other ticket we'll try to stick to the size of the original connectors. They're fairly easy to print, even though we could...

WIP in master, still missing the case for the LED.

The design needs to be fairly flexible, but the basic design of most switches is very similar: https://www.amazon.de/dp/B01N67ICEC/ I'd add an enclosure (see module_enclosure.scad) for the switch, with a little...

@EricBuijs You can change the `width` variables in `connectors_female` and `connectors_male`. I'm going to try it out with 7 for female and 8 for male now.

@Chaos99 I do still see this particular warning, even in latest OpenSCAD from git master: "UI-WARNING: Object may not be a valid 2-manifold and may need repair!" This happens at...

You can define custom values to fit the D1. I'm afraid there isn't a ready-made profile for it yet, but I'm working on it. Which exact D1 modules are you...

@Chaos99 Nice, I got a few of those exact displays still laying around. Will get you exact measurements as soon as I'm home.

Real world measurements incoming: PCB size: 27.1 x 27.2mm (I guess 27x27 would still fit with a little bit of sanding) Display width: 26.5mm x 14.7mm The display's glass plate...