debug / run

[FlexyZ-xx]

Hi

I know this project is an old one. I just got the si4010-kfobdev-434 devkit and got all the software running - was a pain to find it all

Anyway from Silabs IDE I can connect to the "4010-DKPB434-BM" and download code, but how do I run the code with out being connected to the toolstick/debugger?

Is it correct that I can only burn/flash ones - also on the "4010-DKPB434-BM"?

I hope you can help me :)

Thanks Felix

[mstegen]

For programming i used Si4010_NVM_Burn_CL.exe called by a batch file. I found it programmed the fastest. Not sure anymore where i got that from. It's in a folder called Si4010_NvmProgUtil Yes the Si4010 IC's are one time programmable only, but as you noticed you can debug/load the program in RAM to test if everything works.

[FlexyZ-xx]

Thanks for your reply :) - I tried to change the LED to constantly on, but no LED - there is a red LED with activity when uploading code og multi-step

When I press F5/RUN can I remove 4010-DKPB434-BM from the Toolstick and should it keep running? - it has a battery on the back side. Or do I have to test while connected to my computer?

btw. Will this https://www.telstore.it/en/650201131g.html work for the PIC project?

Felix

[FlexyZ-xx]

Hey

Maybe I did not create the project correct in Silabs IDE. I just added your files and the 4010 include files.

But when I "Build Male/Project" I get a lot of *** WARNING L1: UNRESOLVED EXTERNAL SYMBOL , so I guess I need to link with a library or?

Thanks again Felix

[FlexyZ-xx]

Got a little closer by adding the license to KEIL - tried to replace the .c and .h on the "keyfob_demo_2" example folder, but don't seem to work - does the screendump look correct? - or could you send me your original project, so I get all the options correct?