Mike

It looks like Low Pass Filter and Rational Resampler are quite CPU intensive. A receiver flow with additional filtering or resampling blocks makes 4x more load and occupies one Cortex-A72...

> Did they deprecate the old ADC calibration API like expected? Yes, there are two ADC APIs in IDF5.1 at the moment: a now deprecated legacy API coming from IDF4...

I may be missing something, but the ADC2/WiFi workaround seems useless (both on the master branch and here). On a tlora-v2-1-1_6 esp32 device, after reassigning an ADC1-wired BATTERY_PIN to some...

Bumping arduino-esp32 from 3.0.1 to 3.0.3 hasn't gone well for original esp32 targets. IRAM overflows again. ``` region `iram0_0_seg' overflowed by 856 bytes ``` The last one I fixed was...

Thank you for the great hints - these are exactly what I was looking for. I'll continue moving through the list when I have enough time (not so much in...

Thanks, @diggit! Indeed, there were missing nets. Does the block containing U2A make sense now? And what do you think about this HW design - is it compatible with the...

I've updated pin definitions, but some are under question. 1. It seems that there are no OUTPUT_VOLTAGE_MINUS_PIN and MADDR_V_BALANSER_BATT_MINUS for this HW (I routed them to the available ground as...

Schematics has some minor changes: - MUX:6 is connected to ground, - R33 is 100K not 2K, - Q11-Q16 are actually PNP Darlingtons, - added JP1 jumper near C42 to...

Yes, C3 turns out to be very close to CQ3 indeed - just a matter of pin assignments. Charging and discharging functions look good now, though I'm still testing. Probably,...

Got calibration points manually using the Analog Inputs Analyzer. Added some small value to the x of 100mA Icharge point so that the x of 50mA is still positive.